If you’ve broken the screen panel in your home cinema, you can easily replace it by following a few simple steps. First, you should remove the old screen by loosening the spline that secures it to the frame. You can carefully pull the old screen out of the frame if there are multiple splines. It may bunch up in some areas, but don’t worry; the procedure is simple. Contact Rich @ Poolside Screen Repair for all your screen repair needs.
After the screen is loose, you can carefully remove it from its frame by using a flat-blade screwdriver or needle-nose pliers. To fix the screen, follow the steps below. Alternatively, you can hire a professional pressure washer for about $100-250. The professional will use a diluted bleach solution that kills algae and mold. Small tears in the screen can be fixed by using a screen repair kit. Larger holes should be repaired by using a new screen panel. Be sure to use coated steel fasteners in order to avoid an aluminum reaction and keep the panel strong for at least 12 months.
Another common problem with screen panels is sagging. The edges are sagging, and the center is tearing. You can replace the entire panel and save money if the tear is in the center. Otherwise, you will have to replace the entire screen. This may seem like a daunting task, but you’ll end up saving money. In this case, you may want to consider hiring a professional to replace the screen.
The new screen is placed in the case after removing the old one. You should carefully place the new screen in the exact location where the old one was. You should then secure it with adhesive or tape. Once you’ve secured the new screen, test it to ensure the display works again. This process will take several minutes, and you’ll be glad you took the time to replace it. When you’re finished, be sure to reconnect the power cord.
Before you cut, measure the opening of the screen. Measure the length and width of the opening. Add two or three inches for allowance. Next, lay the new screen out flat on a flat surface. Cut it to size using a straight edge, such as a piece of lumber or yardstick. Then, roll it into the frame opening, leaving one or two inches of excess on each side. Replace the screen and try to match the new one’s color and pattern.
Once you’ve decided to replace the screen, buying tools and supplies is time. Depending on your screen type, you may need a screwdriver, a knife, a spline cutter, and a screen roller. If you’re unsure what tools you need, you can purchase a screen repair kit. These kits will contain the tools you need to replace the screen and save you time. Additionally, you can use items from your home to do the job.
